Colourpyne is available in a number of sizes and substrates. Some substrates, colours and sizes are made to order so longer lead times and minimum order quantities apply.
Changing the look of your Colourpyne can be as simple as changing the surface finish*.
*Not all colours are available in all finishes.
Colourpyne board can be finished with Melamine or rigid edge tape.
The Colourpyne colour and finish range is matched with 1mm thick ABS edging for 16mm and 18mm thick board. Matching edging is also available for the Colourpyne commercial range 25mm and 33mm thick board.
Colourpyne should not be used in areas where it will be exposed to high moisture levels, for example, as wall linings for exteriors, for wet areas in regular contact with water, or for bench tops in kitchens and bathrooms.
Australian Panel Products is committed to an eco-friendly and sustainable environment. It is an intrinsic part of our manufacturing and overall business ethos, with decisions made so that they have minimum negative impact on the environment.
Our product is manufactured from managed and renewable plantation pine and is Australian Forestry Standard Chain of Custody certified.
We manage waste responsibly through numerous recycling programs, including waste timber such as saw dust being recycled back into energy. We subscribe to local Government initiatives and voluntary audits, as well as our own internal environmental sustainable initiatives.
All COLOURpyne colours are available on lower formaldehyde emission level E0 substrate to contribute to superior air quality and a healthier working environment. All COLOURpyne MDF substrate is E0. Speak to your COLOURpyne representative for more information on the benefits of using COLOURpyne E0.
Australian Panel Products uses PEFC Chain of Custody (C of C) certification to ensure that the vast majority of wood in COLOURpyne products is legally sourced from sustainably managed forests.
Step 1: Wipe down using a damp soft cloth containing warm soapy water, followed by drying using a soft or microfibre cloth so as not to leave any residue on the door or panel. If this is sufficient there is no need for any further action.
Step 2: For more stubborn stains, use a good quality streak free glass cleaner as per the manufacturers recommendation. You may also use Methylated Spirit on a soft cloth, using a circular cleaning motion being careful not to rub too hard.
Step 3: Repeat step 1 - Wipe down using a damp soft cloth containing warm soapy water, followed by drying using a soft or microfibre cloth so as not to leave any residue on the door or panel.